staking_client

This client enables to perform actions on staking contracts and obtain staking information from both the contracts and subgraph.

Internally, the SDK will use one network or another according to the network ID of the web3. To use this client, you need to create Web3 instance, and configure default account, as well as some middlewares.

Code Example

With Signer

from eth_typing import URI
from web3 import Web3
from web3.middleware import construct_sign_and_send_raw_middleware
from web3.providers.auto import load_provider_from_uri

from human_protocol_sdk.staking import StakingClient

def get_w3_with_priv_key(priv_key: str):
    w3 = Web3(load_provider_from_uri(URI("http://localhost:8545")))
    gas_payer = w3.eth.account.from_key(priv_key)
    w3.eth.default_account = gas_payer.address
    w3.middleware_onion.add(
        construct_sign_and_send_raw_middleware(gas_payer),
        "construct_sign_and_send_raw_middleware",
    )
    return (w3, gas_payer)

(w3, gas_payer) = get_w3_with_priv_key('YOUR_PRIVATE_KEY')
staking_client = StakingClient(w3)

Without Signer (For read operations only)

from eth_typing import URI
from web3 import Web3
from web3.providers.auto import load_provider_from_uri

from human_protocol_sdk.staking import StakingClient

w3 = Web3(load_provider_from_uri(URI("http://localhost:8545")))
staking_client = StakingClient(w3)

Module

class human_protocol_sdk.staking.staking_client.StakingClient(w3)

Bases: object

A class used to manage staking on the HUMAN network.

init(w3)

Initializes a Staking instance

Parameters: w3 (Web3) – Web3 instance

approve_stake(amount, tx_options=None)

Approves HMT token for Staking.

Parameters:
- amount (Decimal) – Amount to approve
- tx_options (Optional[TxParams]) – (Optional) Additional transaction parameters
Return type: None
Returns: None
Validate: Amount must be greater than 0

Example:

from eth_typing import URI
from web3 import Web3
from web3.middleware import construct_sign_and_send_raw_middleware
from web3.providers.auto import load_provider_from_uri

from human_protocol_sdk.staking import StakingClient

def get_w3_with_priv_key(priv_key: str):
    w3 = Web3(load_provider_from_uri(URI("http://localhost:8545")))
    gas_payer = w3.eth.account.from_key(priv_key)
    w3.eth.default_account = gas_payer.address
    w3.middleware_onion.add(
        construct_sign_and_send_raw_middleware(gas_payer),
        "construct_sign_and_send_raw_middleware",
    )
    return (w3, gas_payer)

(w3, gas_payer) = get_w3_with_priv_key('YOUR_PRIVATE_KEY')
staking_client = StakingClient(w3)

amount = Web3.to_wei(5, 'ether') # convert from ETH to WEI
staking_client.approve_stake(amount)

slash(slasher, staker, escrow_address, amount, tx_options=None)

Slashes HMT token.

Parameters:
- slasher (str) – Address of the slasher
- staker (str) – Address of the staker
- escrow_address (str) – Address of the escrow
- amount (Decimal) – Amount to slash
- tx_options (Optional[TxParams]) – (Optional) Additional transaction parameters
Return type: None
Returns: None
Validate:
- Amount must be greater than 0
- Amount must be less than or equal to the amount allocated to the escrow (on-chain)
- Escrow address must be valid

Example:

from eth_typing import URI
from web3 import Web3
from web3.middleware import construct_sign_and_send_raw_middleware
from web3.providers.auto import load_provider_from_uri

from human_protocol_sdk.staking import StakingClient

def get_w3_with_priv_key(priv_key: str):
    w3 = Web3(load_provider_from_uri(URI("http://localhost:8545")))
    gas_payer = w3.eth.account.from_key(priv_key)
    w3.eth.default_account = gas_payer.address
    w3.middleware_onion.add(
        construct_sign_and_send_raw_middleware(gas_payer),
        "construct_sign_and_send_raw_middleware",
    )
    return (w3, gas_payer)

(w3, gas_payer) = get_w3_with_priv_key('YOUR_PRIVATE_KEY')
staking_client = StakingClient(w3)

amount = Web3.to_wei(5, 'ether') # convert from ETH to WEI
staking_client.slash(
    '0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266',
    '0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266',
    '0x62dD51230A30401C455c8398d06F85e4EaB6309f',
    amount
)

stake(amount, tx_options=None)

Stakes HMT token.

Parameters:
- amount (Decimal) – Amount to stake
- tx_options (Optional[TxParams]) – (Optional) Additional transaction parameters
Return type: None
Returns: None
Validate:
- Amount must be greater than 0
- Amount must be less than or equal to the approved amount (on-chain)
- Amount must be less than or equal to the balance of the staker (on-chain)

Example:

from eth_typing import URI
from web3 import Web3
from web3.middleware import construct_sign_and_send_raw_middleware
from web3.providers.auto import load_provider_from_uri

from human_protocol_sdk.staking import StakingClient

def get_w3_with_priv_key(priv_key: str):
    w3 = Web3(load_provider_from_uri(URI("http://localhost:8545")))
    gas_payer = w3.eth.account.from_key(priv_key)
    w3.eth.default_account = gas_payer.address
    w3.middleware_onion.add(
        construct_sign_and_send_raw_middleware(gas_payer),
        "construct_sign_and_send_raw_middleware",
    )
    return (w3, gas_payer)

(w3, gas_payer) = get_w3_with_priv_key('YOUR_PRIVATE_KEY')
staking_client = StakingClient(w3)

amount = Web3.to_wei(5, 'ether')
    # convert from ETH to WEI
staking_client.approve_stake(amount)
    # if it was already approved before, this is not necessary
staking_client.stake(amount)

unstake(amount, tx_options=None)

Unstakes HMT token.

Parameters:
- amount (Decimal) – Amount to unstake
- tx_options (Optional[TxParams]) – (Optional) Additional transaction parameters
Return type: None
Returns: None
Validate:
- Amount must be greater than 0
- Amount must be less than or equal to the staked amount which is not locked / allocated (on-chain)

Example:

from eth_typing import URI
from web3 import Web3
from web3.middleware import construct_sign_and_send_raw_middleware
from web3.providers.auto import load_provider_from_uri

from human_protocol_sdk.staking import StakingClient

def get_w3_with_priv_key(priv_key: str):
    w3 = Web3(load_provider_from_uri(URI("http://localhost:8545")))
    gas_payer = w3.eth.account.from_key(priv_key)
    w3.eth.default_account = gas_payer.address
    w3.middleware_onion.add(
        construct_sign_and_send_raw_middleware(gas_payer),
        "construct_sign_and_send_raw_middleware",
    )
    return (w3, gas_payer)

(w3, gas_payer) = get_w3_with_priv_key('YOUR_PRIVATE_KEY')
staking_client = StakingClient(w3)

amount = Web3.to_wei(5, 'ether') # convert from ETH to WEI
staking_client.unstake(amount)

withdraw(tx_options=None)

Withdraws HMT token.

Parameters: tx_options (Optional[TxParams]) – (Optional) Additional transaction parameters
Return type: None
Returns: None
Validate:
- There must be unstaked tokens which is unlocked (on-chain)

Example:

from eth_typing import URI
from web3 import Web3
from web3.middleware import construct_sign_and_send_raw_middleware
from web3.providers.auto import load_provider_from_uri

from human_protocol_sdk.staking import StakingClient

def get_w3_with_priv_key(priv_key: str):
    w3 = Web3(load_provider_from_uri(URI("http://localhost:8545")))
    gas_payer = w3.eth.account.from_key(priv_key)
    w3.eth.default_account = gas_payer.address
    w3.middleware_onion.add(
        construct_sign_and_send_raw_middleware(gas_payer),
        "construct_sign_and_send_raw_middleware",
    )
    return (w3, gas_payer)

(w3, gas_payer) = get_w3_with_priv_key('YOUR_PRIVATE_KEY')
staking_client = StakingClient(w3)

staking_client.withdraw()

exception human_protocol_sdk.staking.staking_client.StakingClientError

Bases: Exception

Raises when some error happens when interacting with staking.

Last updated 5 months ago

Code Example

Module

class human_protocol_sdk.staking.staking_client.StakingClient(w3)

__init__(w3)

approve_stake(amount, tx_options=None)

slash(slasher, staker, escrow_address, amount, tx_options=None)

stake(amount, tx_options=None)

unstake(amount, tx_options=None)

withdraw(tx_options=None)

exception human_protocol_sdk.staking.staking_client.StakingClientError

init(w3)